Tag Archives: Logan Ave

How to Build a Bed Frame

San Diego Storage:
Our Lincoln Park U-Stor-It team is back with another home project for those out there trying to save a little money on furniture. This simple bed frame design is made to last, but also provides a modern sleek look for any bedroom. While the overall price is low, the quality is to the standard of any mid-price option, and far greater than the particle board used by IKEA or South Shore furniture for a similar price.

What you’ll need

Wood: 324” (27 feet) of 2×4 boards, 270” (22.5 feet) of 1×4 boards, 96” (8 feet) of 4×4 boards.

Supplies: 28 2” wood screws, drill with drilling and screwing bits, latex paint of your color preference, a large paint brush, sand paper, and 35” of Velcro.

Assembly

Have the boards cut so that you have two 74” 2x4s, one 71” 2×4, two 51” 2x4s, and five 51” 1x4s. Sand all boards so they are smooth and splinter free.

The two 74” boards, and the 51” boards make up the base of the frame. Screw them together so that the corners form butt joints with the 51” boards in-between the two 74” boards. Each joint should have two screws.

San Diego
https://dtatist.wikispaces.com/file/view/butt_joint.gif/156408089/butt_joint.gif

Next the 71” board will be placed snugly into the middle of the frame and screwed in.

Take the 4×4 boards and screw them in on the inside of each corner of the main base. These act as the legs. A minimum of 4 screws in total should be used on each leg so that it remains very secure and easily bears the weight.

Paint

Apply two coats of the latex paint to the bed frame; make sure to get it into all cracks and crevices that might show. Paint only the first 3 inches of each side on the spare 1×4 boards.

The Latex in the paint helps protect the color from chipping and creates a nice texture on the wood that is more familiar to furniture than a standard paint.

Support

The last boards will lay across the frame short ways. Lay them out starting in the very middle and placing one down every 14 inches; this will space them out well and create the best support.

Once you’ve figured out where they go, cut up the Velcro to the length of the boards. Apply one side to the frame where the board will go, and the other to the board. Place them down, and the bed is complete! All it needs is a full mattress for the top, however these plans can easily be expanded or shrunken to adjust for other sizes of beds.

Mattress-Size-Chart-1

All of these items can be picked up at a local home improvement store. Just across the freeway from our Lincoln Park U-Stor-It facility in the Imperial Marketplace is a Home Depot. It can be conveniently accessed by crossing the 805 freeway to Ocean View Blvd and Marketplace Ave. The Home Depot can also make all of the main wood cuts necessary on the project.

How to Make a Corn Hole Set

San Diego Storage:
In honor of our U-Stor-It Lincoln Park storage location near Logan Avenue and Imperial Avenue, we have put together a fun project to enjoy the San Diego weather. Everyone loves the tailgating atmosphere whether it be at a local sports facility or a simple beach day. Corn Hole is a great game that anyone can play, and the process of making your own boards is easier than it may seem.

What you’ll need:

Base:

4×2 Plywood Board, 2×4 boards that add up to at least 16 feet in length.

Supplies: 320 and 60 grit sand paper, drill with drilling bits in addition to screwing bits, wood glue, 2” wood screws, jigsaw.

Paint: Clear coat gloss, colors of your choice for design.

Optional: 3/8”x4” screws to make the legs retractable, wood putty, to hide holes made from drilling on top of boards, handles to make transportation easy.

All of these items can be picked up at a local home improvement store. Just across the freeway from our Lincoln Park U-Stor-It facility in the Imperial Marketplace is a Home Depot. It can be conveniently accessed by crossing the 805 freeway to Ocean View Blvd and Marketplace Ave. The Home Depot can also make all of the main wood cuts necessary on the project.

Construction:

Base:

Imperial Avenue
https://www.cornholeantics.com/image/cache/data/College-Logo-Boards/San-Diego-State-Border-1000×563.jpg

The base is 48”x24”. Start with your 4×2 plywood face down and measure the wood so it perfectly measures to the edges of the plywood. Have the short ends measure all the way across the plywood and adjust the long ends to account for the wood of the short ends. The short boards will measure approximately the full 24” but the long ends will be somewhere around 44” rather than the full 48”.

Glue the boards to each other in simple butt joints, and also glue them to the plywood. This will need to dry for about a full day before continuing. Once dry screw in the butt joints, and screw the plywood into the base.

Logan Avenue
http://pop.h-cdn.co/assets/16/21/980×735/gallery-1463997446-attach-top.JPG

The legs of the boards will need to be measured so that, once they are fit in, the board stands 12” tall from the back.

The hole is 6” in diameter, with the very center being 9” from the top and “12 from each side. Measure it out and trace it using a compass. Use a drill to puncture a hole, then use your jigsaw to cut along the circle. After this you can sand the entire board with the 60 grit sandpaper.

Paint:

The design of your paint can be done however you would like. Common designs include a triangle coming down from the hole with a logo or design in the center. When you’re satisfied with the paint design you have created it becomes time for clear coat.

Clear coat protects your project while also providing the slipperiness on top of the board that makes the bean bags slide. After each coat, except the last coat, you want to lightly sand it down with 320 grit sand paper to ensure it comes out evenly and smooth.

You’ve now created your very own Corn Hole boards to enjoy and play with at your next gathering. The only downside is they take up space—not to worry, we have plenty of units available in a U-Stor-It facility near you!

Whether you are in Lincoln Park or Chicago, there is no way not to have fun with these boards!

Tips for Attic Storage, U-Stor-It Lincoln Park

Here in San Diego, California it is extremely rare to find a basement or space for easy storage. Fortunately many homes have attics, but storing items above your head is a process. Our Lincoln Park U-Stor-It team has the tips to make sure everything goes as smoothly as it can.

Install Lights

Even rarer than a basement is an attic that is developed to have light fixtures. Whether it’s a simple push light or old lamp, your experience will be greatly improved from the alternative of trying to do everything with a flashlight!

“I recommend the push light. You might not have easy access to an electric plug for a lamp or light fixture. The push light is battery operated and can be mounted easily to any wall or wood beam. The push light is exactly what it sounds like, simply touch it to turn it on and off.”

– Rachel, Manager U-Stor-It Lincoln Park

http://i.ebayimg.com/02/!BfcVyzgCGk~$(KGrHqEOKjUEryG9WZcfBLBU)P6hp!~~_1.JPG
http://i.ebayimg.com/02/!BfcVyzgCGk~$(KGrHqEOKjUEryG9WZcfBLBU)P6hp!~~_1.JPG

Place Plywood Flooring Down

Many attics don’t have major open area—instead there are wood beams with only insulation in between them. It’s a horrible mistake to place anything on top of the insulation as that is the only thing in-between your item and a hole in the ceiling below you.

Installing plywood flooring is easier than anticipated. Simply buy the plywood and lay it down evenly distributed over the wood beams. Be aware of the quality of the ply wood, but generally it should be able to hold you and the weight of your belongings without collapsing.

http://www.newsonair.org/images/beautiful-attic-deck-8-unfinished-attic-flooring-640-x-480.jpg
http://www.newsonair.org/images/beautiful-attic-deck-8-unfinished-attic-flooring-640-x-480.jpg

Take Advantage of Storage Bins

It’s unlikely you’ll be heading up and down to access the attic all the time. This means easy access doesn’t necessarily become top priority. Instead saving space, especially in such a confined space, becomes the necessity.

Group your smaller items and place them in labeled stackable bins. The downside of attic storage is that it is extremely difficult to store large items; you may need a storage unit for these large items. At least with the smaller to medium sized items, just about everything can fit into these bins making storage very efficient.