Tag Archives: cornhole

How to Make a Corn Hole Set

San Diego Storage:
In honor of our U-Stor-It Lincoln Park storage location near Logan Avenue and Imperial Avenue, we have put together a fun project to enjoy the San Diego weather. Everyone loves the tailgating atmosphere whether it be at a local sports facility or a simple beach day. Corn Hole is a great game that anyone can play, and the process of making your own boards is easier than it may seem.

What you’ll need:

Base:

4×2 Plywood Board, 2×4 boards that add up to at least 16 feet in length.

Supplies: 320 and 60 grit sand paper, drill with drilling bits in addition to screwing bits, wood glue, 2” wood screws, jigsaw.

Paint: Clear coat gloss, colors of your choice for design.

Optional: 3/8”x4” screws to make the legs retractable, wood putty, to hide holes made from drilling on top of boards, handles to make transportation easy.

All of these items can be picked up at a local home improvement store. Just across the freeway from our Lincoln Park U-Stor-It facility in the Imperial Marketplace is a Home Depot. It can be conveniently accessed by crossing the 805 freeway to Ocean View Blvd and Marketplace Ave. The Home Depot can also make all of the main wood cuts necessary on the project.

Construction:

Base:

Imperial Avenue
https://www.cornholeantics.com/image/cache/data/College-Logo-Boards/San-Diego-State-Border-1000×563.jpg

The base is 48”x24”. Start with your 4×2 plywood face down and measure the wood so it perfectly measures to the edges of the plywood. Have the short ends measure all the way across the plywood and adjust the long ends to account for the wood of the short ends. The short boards will measure approximately the full 24” but the long ends will be somewhere around 44” rather than the full 48”.

Glue the boards to each other in simple butt joints, and also glue them to the plywood. This will need to dry for about a full day before continuing. Once dry screw in the butt joints, and screw the plywood into the base.

Logan Avenue
http://pop.h-cdn.co/assets/16/21/980×735/gallery-1463997446-attach-top.JPG

The legs of the boards will need to be measured so that, once they are fit in, the board stands 12” tall from the back.

The hole is 6” in diameter, with the very center being 9” from the top and “12 from each side. Measure it out and trace it using a compass. Use a drill to puncture a hole, then use your jigsaw to cut along the circle. After this you can sand the entire board with the 60 grit sandpaper.

Paint:

The design of your paint can be done however you would like. Common designs include a triangle coming down from the hole with a logo or design in the center. When you’re satisfied with the paint design you have created it becomes time for clear coat.

Clear coat protects your project while also providing the slipperiness on top of the board that makes the bean bags slide. After each coat, except the last coat, you want to lightly sand it down with 320 grit sand paper to ensure it comes out evenly and smooth.

You’ve now created your very own Corn Hole boards to enjoy and play with at your next gathering. The only downside is they take up space—not to worry, we have plenty of units available in a U-Stor-It facility near you!

Whether you are in Lincoln Park or Chicago, there is no way not to have fun with these boards!